Anyway...this post is about our recently re-done bedroom. Two years ago Hubs and I busted down our old bed frame with the intention of building a platform bed. Aside from the bathroom, our room is the smallest in the house(9x9), so space is at a premium. BUT...24 months later we were still sleeping on a box spring and mattress on the floor. Hrumph!
We started with a NEW mattress. It is heavenly!! It is by Dormeo. BUY one...no seriously, these beds are AWESOME! I digress. Knowing we could not put this bed on the box spring, let alone on the floor, forced us to build that frippin' platform bed. I used Ana White's Twin Storage Captain's Bed woodworking plans. http://ana-white.com/2010/05/twin-storage-captains-bed Check this site out! It has GREAT ideas! The plans are simple and super easy to follow. With the help of my BIL to cut the wood (simple stock pine) and piece it together We had our bed frame! YEA!
Now, I didn't want stain and I wanted it to look aged. After hours of scouring the internet for ways to achieve that without tons of staining, sanding, waiting...zzzzzz...I opted for the old steel wool in vinegar and then add water. It was quick and easy and gave it a gray/brown color. Here is what I did: 3 steel wool pads, 2 quarts of vinegar. Let it sit for 7 days (the longer it sits the better the color)in a bucket with a lid. Add the same amount of water as you did vinegar. "Paint" on with a foam brush. Let dry. Whew! I know...what a tiring process right? Be forewarned, the wood WILL smell like vinegar for a few days, but WILL dissipate. I promise.
Next came deciding if we wanted a headboard or to cover the wall in fabric. Hubs wanted a headboard. So...I took the idea of the Captain's bed, re-worked it and made the headboard the exact same way. We had to put the side cubbies up off the floor since we have a wall register. Unfortunately we also have lathe and plaster walls and I was worried about them falling. Honestly though, L-brackets (which you can see in the picture and I need to still paint to the wall color) and 52 drywall screws later and that sucker isn't going ANYWHERE! I did get my fabric on the way though. Between the top cubby and side wall cubbies I stapled some quilt batting on the wall, then stapled some fabric over it and finally finished off with some ribbon hot glued on to hide the staples.
The lanterns on the top shelf I found in my parent's garage. I thank my father for being a pack rat. :) I washed them down with some steel wool and vinegar, cleaned the globes, placed battery operated Christmas lights inside and they are now nightlights. LOVE them!
The little boy and girl neck rolls on the bed I made with 4 towels, 1 yard of fabric and some cording. They are easy to do. Roll up two towels per neck roll, pin. Measure diameter of roll, add 3/8" seam allowance. Make a small pocket for cording on both short ends and sew. Sew large seam together. Snip two spots for cording to go through. Insert towels. Remove pins. Thread cording and tie it. The "appliques" were made using a boy and girl silhouette I found on the internet, reversing the image, applying heat bond to fabric, and cutting out image. Peeled off the back of heat bond, applied fray check and then ironed on. It was WAY cheaper than buying those foam neck rolls.
The shades were done with just some painter's tape and acrylic paint. I REFUSE to give up my darkening shades. Not happening.
So that's where things stand now. I still have 3 rugs to make, pictures to hang and the dresser to re-do, but the MOST important thing is I have a bed!! I am an adult now! Go me! Take that IKEA!
